Siemens Planet :: View topic - MSVdriveE Receive Messages on your MMC card

Gandalf · Last edited by Gandalf on Sat Nov 20, 2004 11:11pm; edited 2 times in total

Although this was an option on all the other s60 phones Siemens disabled it to SX1 (at least on firm. prior to 0 mainly for MMC swaping reasons. But there is a way to enable it. First download and install MsvDriveE.sis . After running it once the app will change the drive for saving messages from C to E and copy some files from C:\system\mail to E:\system\mail but not all (you have to copy the rest yourself using a 3rd party File Manager). Any Messages saved to an MMC from another s60 phone will be also readable. Be carefull though not to run the app again because you'll end up with an error message and may the messages stored to MMC be lost. Also do not remove the MMC when the phone is on. To undo the app changes just restart the phone without the MMC. BE WARNED THAT I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THIS APP.

link to download
username : mobile
password : elibom

i suppose this isn't illegal but if it is ZeeM please delete this post

ZeeM · Posted: Wed Nov 03, 2004 9:19am Post subject:

nope its 100% legal thanks for posting that many users need it

Darkchild · Posted: Wed Nov 03, 2004 10:08pm Post subject:

thanks for your interest!! My SX1, My Precious..

metall · Posted: Thu Nov 04, 2004 6:06am Post subject:

Hey My SX1, My Precious ,
Exactly you are better one right there.

Gandalf · Posted: Thu Nov 04, 2004 3:29pm Post subject:

Gandalf · Posted: Thu Nov 04, 2004 3:31pm Post subject:

Q.how can i know that the MSVdriveE is running???

when you run it once if you don't remove your MMC card and turn the phone on the MSVdriveE is always on
but if you remove your MMC card and turn on the phone you must run it once the MMC card is insered again

a little trick to know if it's on or off
create a new mailbox in your messages name it anything for example MSVdriveE when your MSVdriveE is off to turn it off take out your MMC,turn on the phone and then put on the MMC card and like this the MSVdrive is off once you created the mailbox run the MSVdrive only once.

now the trick if you are not sure if it's on or off goto Messeges if you see there's a mailbox with the name that you created above this means it's off then run it once if not then it's on
voilà
and there's another way you install SmartLauncher on your phone
when the smartlauncher is on, press the Menu key and hold it (running apps menu) and you'll see a program without unknown icon (skyblue square) with the name "???" this is the MSVdriveE if it doesn't exist that means it's off

PML86

I would like to save my message on MMC of my siemens sx1. I have already downloaded the MsvDrveE but it doesn't work.
Can you help me

Gandalf · Posted: Tue Nov 09, 2004 2:49pm Post subject:

please tell me in details what did you do
normally it consists on installing the msvdrivee to your MMC card, then run it once and that's it

pete338 · Posted: Fri Nov 26, 2004 11:55am Post subject: Messages on MMC

Hi,
I downloaded the MSVDriveE and installed it on my SX1.But I found that the messages that was original on the phone went missing.Later I power-up the phone without the mmc the messages were back.Is it normal?By the way I understand that for the nokia 6600 there's an option to let you choose whether to use the phone memory or the mmc for saving messages, will I have this option when I install the MSVDriveE?

Thanks for any response that I can get.

Gandalf · Posted: Fri Nov 26, 2004 5:16pm Post subject:

yes it's normal.
and no you cannot use the same function as on the 6600

pete338 · Posted: Tue Nov 30, 2004 11:35am Post subject: Messages on MMC

Hi Wael,
Thanks for the reply.I found that there is a square with an arrow pointing upwards on the top middle of the screen when I install MSVDriveE.This is the same symbol when I'm sending message and will disappear once the message has been sent.But when I installed the MSVDriveE the symbols does not go away.Any way to make this symbol disappear when the message is sent.
Thanks and regards.

Gandalf · Posted: Tue Nov 30, 2004 2:19pm Post subject: Re: Messages on MMC

spheng · Posted: Tue Nov 30, 2004 2:25pm Post subject: Re: Messages on MMC

pete338 · Posted: Tue Nov 30, 2004 4:48pm Post subject: Messages on MMC

Hi,
The messages is not successfully sent due to some errors, that's when the arrow thing appear.Does not seeems to be able to get it off though...Any ideas.
Thanks.

pete338 · Posted: Tue Nov 30, 2004 4:56pm Post subject: Messages on MMC

Hi,
Manage to get rid of the arrow thing.You're right, there's some messages sitting in one the folders...I deleted it and the arrow is gone.
Thanks and Regards.

sasi_ppm · Posted: Fri Aug 26, 2005 1:59pm Post subject:

I have downloaded and installed MsvDriveE in Nokia 3230. but thats not working. When I send mp3 files it says Memory is not enough. How to change the message receiving from Phone to MMC. Any useful and tried out options please...........

Thanks in advance

Sasi

SandStorm · Posted: Fri Aug 26, 2005 2:03pm Post subject:

Welcome to SiemensPlanet Wink

Well, this program is intented to work on Siemens SX1.
I can't give you support on that Nokia phone because I never worked with that model, and because here we treat stuff about Siemens phones, this is one Siemens forum. Wink

shady25 · Posted: Tue Jan 17, 2006 2:04am Post subject:

hello Sx1 lover's Very Happy

I instelled MsvDrive.sis and after that my inbox mensages desapered! what do you think about this? did the program erased ? tkx

DireWolf

Did you do one of these things?

SandStorm · Posted: Tue Jan 17, 2006 11:11am Post subject:

Once installed, only ran this app ONCE.
And is better to not use the hot-swap function, because this program still running and can riun your messages too.
It is all explained on Gandalf's posts Smile

Menu
Search	Usergroups	Register	Profile	Log in to check your private messages	Log in